Κύριο Μενού:
Manuals > crisiscables
Audio Speaker Cable
crisiscable -sp1
Instruction manual
Dear music lover,
Thank you for choosing our speaker cable. By expressing your confidence in us you have become a respectable member of our team.
This speaker cable is manufactured by providing complete in-house all-necessary procedures starting by using individually and very carefully selected basic raw materials until our high quality control of the final product, packing and shipping from our industry in Greece.
We sincerely hope that it will bring you many years of outstanding listening pleasure.
Please observe the following important notes concerning valuable instructions and maintenance in order to achieve maximum performance and satisfaction from your speaker cable.
1. Methods for handling
>It is very important to remember not to touch the cables when inserting and most importantly when removing a cable from any device. Make sure to grip the plug gently. A common mistake is to press hard and rotate the plug in order to remove a cable. So please just pull or push gripping the plug gently.
>Do not leave cables for a long period of time on the sockets. Periodically remove them and clean if any oxidation from plugs and contacts.
>Remember not to touch the metal contacts with your hands.
>Never use strong cleaning agents on cable jackets and plugs. However, our antistatic "pastra" liquid provided is specially designed for this purpose.
>Do not tightly bend cables for any reason. Imagine what happens to a wire if we bend it repeatedly; the metal structure changes until it brakes.
>Do not jerk or stretch hard.
>Avoid direct sunlight on cables and connectors.
>Keep your cables cool: The lower the temperature, the less chemical activity.
>Keep all power cords, ferrous objects and any device that produces electromagnetic fields away from speaker cables.
>Be careful when installing cables to avoid positive and negative paths to short circuit.
>When installing cables make sure that all the devices are off. Never leave one end of any cable open.
>Make sure that power cords are as far away as possible from speaker cables. In special cases when you must cross whit each other, do so at 90 degree angle to avoid interferences.
2. Connection
This speaker cable is not directional when it is manufactured. However after about 40 hours of use in one direction it will sound better when it is used in the original direction of break in. We strongly recommend cleaning all device sockets before installing this cable using our "pastra" liquid provided. Otherwise clean the contacts by rotating gently the connectors when making a first contact.
3. Burn in time
This speaker cable is already factory burn-in, however it performs better after a period of time. Some well known and other not very well known mechanisms cause this phenomenon. Current seems to behave like water -finding the easiest way to travel via the metal structure. So this cable requires at least 40 hours of working in order to achieve good performance and reliability. After that it gets better, however as this phenomenon increases exponentially, it gradually goes slow. This effect is not measurable though.
4. Important notes
>This cable operates in accordance with its specifications within the following environmental range: Temperature 10 to 35°C and Humidity 10 to 80%.
>Never let unsupervised children play with this cable or with its packaging.
>Never plug this cable to the AC power supply.
>Use the original undersigned packaging to avoid damage due to storage or shipping.
>If this cable is damaged or somehow does not work properly please contact your local distributor as soon as possible.
>Please, if disposing packaging materials, do so in an environmentally friendly fashion.
>Keep these instructions.
>The right to change specifications without notice is reserved by the Manufacturer in line with technical developments.
> read more: Handling cables
Thank you for your cooperation.
Constantine P. Mamalos
www.mamalos.com